Chadster766 Community Forums

Went back to using DD-WRT on my DLink-DIR890L but it's nowhere near as useful/fast/stable as my WRT1900 and I have been bothered by the WRT3200 problem for too long, so I ran through all previous solutions again just to ensure I hadn't missed something, then I started poking around the uboot console...

Yes to both questions, and I also tried openwrt 21.02.1, and another 3rd party firmware (divested wrt snapshot r17859) just to see if it would take anything aside from default linksys to no avail. Shot in the dark here but could doing a u-boot rescue possibly break the logjam or is it more likely to...

Sorry got called into work, here's my attempt to flash openwrt 19.07.8 BootROM - 1.73 Booting from NAND flash General initialization - Version: 1.0.0 AVS selection from EFUSE disabled (Skip reading EFUSE values) mvSysEnvIsFlavourReduced: TWSI Read of 'flavor' failed Detected Device ID 6820 High spee...

I'm eating breakfast and flashing router with openwrt shortly, but I noticed rhat McDebian isn't listed as a 3rd party firmware here . It might help spread the word about the awesome work you've done if it was.

Sorry my work/sleep schedule is the worst Here is my most recent attempt, and the router still refuses to do anything other than imitate a paperweight after reciting its famous last words: "Starting kernel" BootROM - 1.73 Booting from NAND flash General initialization - Version: 1.0.0 AVS ...

Here is the post firmware flashing attempts to boot McDebian log any time I restart the router it's due to hanging and lack of response to ping, tftp, serial commands etc. I'll attempt to re flash and post logs as soon as I get home. And on both 3rd party and linksys firmware serial console is unres...

Long story short I can't figure out what I'm doing wrong but no matter what I try I can't get any non linksys firmware to boot past the launching kernel stage; I've followed your instructions and those found on the openwrt forum/wiki to install McDebian and/or OpenWrt to no avail. Firmware appears t...